Universal motor 12 - 24 V DC for tough applications
The 8mm stainless steel shaft is continuous and
both motor ends supported by sealed ball bearings. 
This makes the motor ideal for direct drive.
Own devices for separating, grinding or moving can be
easily and quickly.
The motor already rotates at 1 Volt and even with this low voltage, it develops
a considerable torque.
In short-time operation, the motor also drives a cut-off wheel or a
circular saw blades used in model making.
Shaft and bearing modified - new.
The 8mm shaft, flattened on one side, has a 4mm internal thread for the
free use.

However, motor heating should be observed and should not be driven above 60°C.
The motor is designed for short to medium operating time at high load.

Dimensions
diameter: 48,5 mm
Diameter shaft: 8 mm with 4mm internal thread
Length: 89 mm (without shaft)
Total length: 109 mm (with shaft)
Weight: 535 g