Marantec motor unit Comfort 525  pre-cabled 1500 mm, anthracite grey with a separate control unit Control x.51; multi bit 868 MHz remote control; 1 pc. Digital 304 4-channels mini manual transmitter, with fittings, gate and post brackets (zinc plated and blue chromated), installation material

Application:
with a leaf width* of 4.000 mm max.
with a leaf height of  2.500 mm max.,
with 50% max. covered leaf surface
with a max. leaf weight of 400 kg,
ascent in connection with optional accessories (on request),
e-measure from -30 to 150 mm  

Function:
- Economy mode
- Reference point technology
- Smooth start/smooth stop
- Excess travel stop
- Release
- Connection of push button, remote digital coder, and key-operated push button
- Connection of 'Open' and 'Close' photoelectric barrier
- Connection of 24 V DC signal light
- Connection of 24 V DC electronic lock
- Connection of device 8.2 kOhm 'Open' and 'Close'
closing edge safety device
- Built-in 8.2 kOhm analysis
- Automatic 'Open' and 'Close' shutoff separately programmable
- Back-up capability in connection with 400/700 back-up
- Connection of battery back-up
- Partial opening programmable (only with 1 leaf gates)
- Smooth running position OPEN and CLOSE separately programmable
- Smooth running speed OPEN and CLOSE separately programmable
- Automatic closing function
- Programmable relay output for signal light, gate position OPEN/CLOSED, wiping pulse – 1 second, malfunction, illumination
- Error message
- Reset function

Technical specifications:
Pressure and traction: 3.000 N 
Speed of rotation: 15-25 mm/sec
Opening duration (gate specific): 15-25 sec
Height of lift: 405 mm
Nominal voltage: 230 V
Nominal frequency: 50/60 Hz
Current uptake: 1.0 A
Power consumption service: 0.2 kW
Power consumption stand by: < 5 W
Operating mode (duty cycle): 5 min KB
Control voltage: 24 V
Protection type motor unit: IP 44
Protection type control: IP 65
Protection class: I
Colour: anthracite grey
Motor unit dimensions: 768 x 208 x 136 mm
Control dimensions: 120 x 240 x 100 mm
Temperature range: -20°C bis +60°C (-4°F to +140°F)

In order to stabilize the leaves in a shut position we recommend a mechanical stop at the “CLOSED” position.

*The max. gate leaf width mentioned is a non-committal recommendation for smooth-running gates. If higher wind surcharges are expected (e. g. with full surface gate designs) the wind and the drive moments require checking.

When enquiring for the suitable hinged gate operator please fill in the clarification form for hinged gates under “PDF instructions” button in the hinged gates category.