Expand picture | Marantec Comfort 850S sliding gate operator, for gates up to 400 kg, - not available !Material number: 83001 Shipping and handling costs:47,95 € Back Article description - Marantec Comfort 850S sliding gate operator, for gates up to 400 kg, - not available !Marantec Motor unit comfort 850 S, no longer deliverable ! (please see replacement Comfort 860 S for rail module 4) with integrated control unit Control x.81, Drive system for sliding gates up to max. 400 kg, incl. drive cog. Modul 4, with multibit remote control 433 MHz, Digital 304 Mini hand transmitter, 4-channel 433 MHz , Mounting material Electrical details: - Nominal voltage: 230 V - Nominalt frequencey: 50 / 60 Hz - Power consumption: 1 A - Power input in operation: 0,2 kW - Power input stand-by: < 4W - Operation mode (duty cycle): KB 5 min. - Control voltage: 24 V DC - Protection category: (Motor unit) IP 44, (Control unit) IP 65 - Protection class: III Mechanical details: Pusch and pull force: 400 N Travel speed programmable: 180 mm/sec. Opening time (gate-specific) approx: 22 sec. General details: Measurement (motor unit): 330 x 335 x 182 mm Range of temperature: -20°C to +60°C Function: - Economy mode - Reference point technique - Soft start/Soft stop - Blocking protection - Excess travel stop - Release - Connection for pushbuttons, code keypads and key switches - Connection photocell 'Open' and 'Close' - Connection signal light 24 V DC - Connection closing edge safety device 8,2 kOhm 'Open' and 'Close' - Integrated evaluation 8,2 kOhm - Automatic cut-out 'Open' and 'Close' separately programmable - Partial opening programmable - Gate travel speed programmable - Soft run position 'Open' and 'Close' separately programmable - Soft run travel speed 'Open' and 'Close' separately programmable - Automatic timer function - Retrofitting of potential-free signal relay possible for signal light, wiping impulse, 3 minutes light, gate position message and malfunction message - Drive cog. adjustable in height up to maximum 160 mm - Error message - Reset function Application: - for sliding gates up to a max. width of 8.000 mm - for a max. gate weight of 400 kg - for toothed rack Modul 4 - no active main and second closing edge safety device required for sliding gates up to a max. weight of 400 kg (refer to declarations of conformity) - Aluminium post usable as gate post Recommend this product. |