Marantec motor unit Comfort 530L pre-cabled, anthracite grey, 1- leaf; pre-wired 1500 mm
with a separate control unit Control x.51; with multi-bit 868 MHz remote control; 1 pc. Digital 304 4-channels mini hand transmitter, with fittings, gate and post brackets (zinc plated and blue chromated)  mounting material

Application:
with a leaf width* of 4.000 mm max.,
with a leaf height of  2.500 mm max.,
with 50% max. covered leaf surface,
with a max. leaf weight of 350 kg,
Slope in conjunction with optional accessories (on request), e - dimension 30 to 150 mm

Function:
- Economy mode technology
- Reference point technology
- Smooth start / smooth stop
- Anti-lock system
- Excess travel stop
- Release
- Connection of push button, remote digital coder, and key-operated push button
- Connection of 'Open' and 'Close' photoelectric barrier
- Connection of 24 V DC signal light
- Connection of 24 V DC electrical lock
- Connection of device 8.2 kOhm 'Open' and 'Close'
  closing edge safety device
- Built-in 8.2 kOhm analysis
- Automatic 'Open' and 'Close' shutoff separately programmable
- Back-up capability in connection with back-up 400/700
- Connecting battery back-up
- Partial opening programmable (only with 1 leaf gates)
- Gate travel speed programmable
- Smooth running position OPEN and CLOSE separately programmable
- Smooth running speed OPEN and CLOSE separately programmable
- Automatic closing function
- Retrofitting a potential-free signal relay possible, for signal light, wiping impulse, 3 minutes light,
  end position signal  and malfunction notification
- Error message
- Reset function

Technical specifications:
Pressure and traction: 3000 N
Height of lift: 600 mm
Operating voltage: 230 V
Rated frequency: 50/60 Hz
Current consumption: 1.0 A
Operating: 0.2 kW
Stand-by power consumption: <5 W
Mode (duty cycle): cycle 5 min
Control voltage: 24 V
Protection Motor unit: IP 44
Control protection: IP 65
Protection class: I
Colour: anthracite grey
Motor unit dimensions: 931 x 208 x 136 mm
Command control dimensions: 120 x 240 x 100 mm

In order to stabilize the leaves in a shut position we recommend a mechanical stop at the “CLOSED” position.

*The max. gate leaf width mentioned is a non-committal recommendation for smooth-running gates.
If higher wind surcharges are expected (e. g. with full surface gate designs) the wind and the drive moments require
checking.

When inquiring for the suitable hinged gate operator, please apply clarification form
for hinged gates under “PDF instructions” button by the hinged gates category.