Comfort 360 drive unit with Multibit 868 MHz remote control, 1x Digital 663 3-channel mini hand transmitter, 1x Digital 572 2-channel micro hand transmitter, universal mounting kit for overhead and sectional doors, without drive rail.

Electrical data:
- Nominal voltage: 230 V
- Rated frequency: 50/60 Hz
- Current consumption: 1.1 A
- Power consumption in operation: 0.25 kW
- Standby power consumption: approx. 0.6 W
- Operating mode (switch-on time) : S2-2 Min.
- Control voltage: 24 V DC
- Protection class of the drive unit: IP 20
- Protection class II

Mechanical data :
- Pulling and pushing force: 650 N
- Travel speed: 220 mm/sec.
- Opening time (door-specific): approx. 9.5 sec.

General data:
Dimensions: (motor unit) 360 x 135 x 335 mm
Weight (total): 7.4 kg
Temperature range: -20°C to +60°C
Light source: 2 x 10-LED-Modul

Functioning:
- Energy saving technology blueline
. . fast running function
. electronic end stop
- . soft start/stop
- Anti-lift safety device
- Blocking protection
- Operating time limitation
. Pull cable release (inside)
- Push-button connection, photocell, stop circuit
- programmable input/output
. Connection for extension modules, no EM track module 131
. Connection for battery backup
. Output 24 V DC, 250 mA
. Rear jump
. Maintenance and cycle counter
- Automatic shutdown OPEN and CLOSED separately programmable
. Programmable partial opening
. Operator lighting can also be switched by radio
- Separately programmable door speed OPEN and CLOSE
- Soft closing position OPEN and CLOSE separately programmable
. Separately programmable soft-close speed OPEN and CLOSE
- automatic closing function
- Error memory
- Reset function
. Programming and status indication via LCD display

Application :
- Drive system for garage doors for private use
- for up-and-over doors up to 3,500 mm width and 110 kg door weight
- for single-skinned sectional doors up to 5,000 mm door width and 110 kg door weight
- for double-skinned sectional doors up to 3,000 mm door width and 110 kg door weight
- for overhead and canopy doors up to 3,500 mm door width and 2,250 mm door height and 110 kg door weight
- for up to 10 spaces, 20 manoeuvres
. when using a 1.2 mm track with ball bearings on both sides, max. 14 adjustment positions, 28 manoeuvres
- for drive rails with roller chain or toothed belt.