Expand picture | Hörmann manual transmitter HSZ 1 BS 1-channel 868.3 MHzMaterial number: 436779 Shipping and handling costs:29,95 € Price: 62,00 € Net price:52,10 € Number: PL: VitrineAdd to shopping basketBack Article description - Hörmann manual transmitter HSZ 1 BS 1-channel 868.3 MHzHörmann remote control HSZ 1BS 1-channel 868.3 MHz,
pulse, cigar lighter pluggable, battery included
Battery: Lithium coin cell 3 V / Type: CR2025
Dimensions (diameter): d 29 x h 35 mm ATTENTION!!! This 868 MHz remote control is supposed to replace 868 MHZ controls = with blue buttons. Only order it if your Hörmann remote control has blue buttons too!!!
To control older Hörmann door-drives with 27 MHZ or 40 MHz (different button colour) or third-party brands you need at least one Hörmann receiver with 868.3 MHz.Coding of a remote control with the help of an already operative remote control. ATTENTION: Coding process opens the gate. In order to control the door and in order to prevent unexpected consequences we recommend that you remain in the garage while coding. 1. Take your already operative remote control and press one button. 2. Now take the new remote control and act as follows: - for remote controls with blue buttons: hold side by side - for remote controls with green or grey buttons: hold opposed to each other 3. Press the same button on your new remote control and keep it pressed. For 4 seconds the LED flashes with low frequency, then with higher frequency thus showing successful coding. Release all buttons. 4. Repeat this process with every button on your remote control. 5. Test your new remote control Coding by use of a radio receiver For remote controls with blue or grey buttons ATTENTION: this action deletes all remote controls which have been stored in the receiver before. Look for the radio receiver of your drive. (small grey box, circa 1/3 of the size of a cigarette packet). Press the button of your radio receiver. The LED of the receiver illuminates and blinks slowly. Please depart in 3m distance of the receiver. Take your new remote control and press one button. The LED of the receiver flashes with higher frequency while still pressing the button. Release the button of your remote control. The control lamp continues flashing for some seconds and finally goes out. Test your new remote control. Recommend this product. |