 |
;) Expand picture | CARDIN manual transmitter of S449 4-channels 433.92 MHzMaterial number:
S449QZ/4 TRQ449400 (pa: 2655116) Shipping and handling costs:29,95 € Price: 45,00 € Net price:37,82 € Number: PL: S05-66dBack Article description - CARDIN manual transmitter of S449 4-channels 433.92 MHzCARDIN manual transmitter S449 433.92 MHz o1-canal, black and grey housing, black keys, of impact-proof plastic, 2 pieces 3 V (6V) lithium batteries CR2032 Under certain conditions the receiver has been blocked by the installer, in this case you can not program the new transmitter. It is therefore necessary to contact the supplier for receiver. If the receiver has not been blocked, proceed as follows: Coding a handheld remote transmitter or already operational: You can encode your new hand transmitter with either an already working manual transmitter or with a radio receiver. I ° coding with an already working manual transmitter Take an already working manual transmitter and the new manual transmitter. Position yourselves close to the operator pulse controlled by the manual transmitter. (Stand in the destination field of the radio receiver.). Take the already working manual transmitter: Press the hidden key (small hole on the hand transmitter) with a paper clip. The receiver gives a short acoustic signal. Press one of the keys of the already working manual transmitter = a short acoustic signal comes from the receiver. The receiver remains in the learning mode for 5 seconds. Take one of the new manual transmitters and press the key you want to register. 2 short acoustic signals come from the receiver to confirm registration of the new manual transmitter. You can register several manual transmitters one after another. ATTENTION: After 5 seconds of pause, a long beep from receiver announces the learning mode II ° coding with a radio receiver Open the housing of the radio receiver card. Press the "MEMO" key on the radio card A control light starts to shine and flashes slowly. Take one of the new manual transmitters and press the key that is supposed to be registered The control light goes out. Let go the "MEMO" key and the key of the manual transmitter. The control light on the radio card starts to flash. Press the same key of the manual transmitter again. The control light goes out to confirm registration of the manual transmitter. Repeat the process for the keys and the remote control that you want to register. Recommend this product. |
 | Battery CR2032, 3V for transmitterMaterial number:
CR2032 (pa: 2779799) Price: 3,50 € Replacement battery 3 V Type CR2032 for mini remote control and radio code switch FCT 3 b ...PL: S05-P69b Details |
 | CARDIN receiver FM, frequency modulated 2-channel 433.92 MHzMaterial number:
RMQ449200 / RQM449200 Price: 113,88 € Mini radio receiver 433,92 MHz FM, 2-channel, 12/24 Vac-dc, for use in dry rooms suitable enclosure IP20, appropriate ...Details |
 | CARDIN receiver FM, 4-channel 433.92 MHzMaterial number:
RCQ449100 Price: 87,96 € Mini radio receiver 433,92 MHz FM, 4-channel, 12/24 Vac-dc, ...Details |