Marantec motor unit Comfort 580 with a separate control unit Control x.51; with multi bit 868 MHz remote control; 1 pc. Digital 304 4-channels mini hand transmitter, with fittings (not for industrial use!)

Application:
with a leaf width* of 2,500 mm max.,
with a leaf height of  2,500 mm max.,
with 50% max. covered leaf surface
with a max. leaf weight of 250 kg, 
requires an OPEN and CLOSE end stop

Function:
- Economy mode / smooth start/smooth stop
- Reference point technology
- Anti-lock system / excess travel stop
- Release
- Connection of push button, remote digital coder, and key-operated push button
- Connection of 'Open' and 'Close' photoelectric barrier
- Connection of 24 V DC signal light
- Connection of 24 V DC electrical lock
- Connection of device 8.2 kOhm 'Open' and 'Close'
closing edge safety device
- Built-in 8.2 kOhm analysis
- Automatic 'Open' and 'Close' shutoff separately programmable
- Partial opening programmable (only with 2-leaves  facilities)
- Gate travel speed programmable
- OPEN and CLOSE smooth running position and smooth running speed separately programmable
- Automatic closing function
- Error message
- Reset function
- Retrofitting a potential-free signal relay possible, for signal light, wiping impulse, 3 minutes light, end position signal  and malfunction notification

Technical specifications:
Rated voltage: 230 V
Rated frequency: 50 Hz
Current uptake: 1 A
Power input in operation: 0.2 kW
Power input stand by: 1 W
Operating mode (duty cycle): 5 KB/min.
Control voltage: 24 V DC
Protection type: motor unit IP 67, control IP 65
Protection class: II

Mechanical specifications:
Torque: 175 N
Travel speed: 150 to 220 mm/sec.
Opening time (gate specific) approx..: 17 sec
Motor unit dimensions: 300 x 170 x 155 mm
Control dimensions: 120 x 240 x 100 mm

 *The max. gate leaf width mentioned is a non-committal recommendation for smooth-running gates. If higher wind surcharges are expected (e. g. with full surface gate designs) the wind and the drive moments require checking.