Hörmann 1-leaf articulated arm drive set VersaMatic battery pack
The VersaMatic swing gate operator with integrated control unit is the ideal solution even for unusual installation situations. It is suitable, for example, for installation on very deep door pillars; the mounting position can also be variably selected and thus optimally adapted to the respective situation. In addition, there is no need to install a separate controller - saving space and time. What's more, the VersaMatic convinces with its proven technology: its speed, for example, can be individually adjusted to achieve uniform door travel for all door sizes.

technical data:
max. sash height: 2000mm
max. sash width: 1000-2000mm
max. door weight: 150 kg
max. door cycles per day / hour: 5 / 2

Included in the set:
1x drive incl. control unit
1x articulated arm
1x 5-button remote control HS5-BiSecur
1x integrated 5-channel receiver Bisecur
1x External housing with built-in battery packs and charge controller
1x solar module with 10 m connection cable
mounting material

Note:
If impulse control is used without a view of the door or if automatic closing is activated, a photoelectric sensor must be used!
When planning swing gate systems, the maximum door leaf fillings must be checked taking into account the regional wind loads!
The requirements of DIN EN 13241 must be observed.
The maximum length of the connecting cable between the drive and the control unit must not exceed 30 m.
An electric lock is required for doors with partial filling!
From a gate leaf width of 1500 mm upwards, an electric lock is recommended!