 |
;) Expand picture | BFT Rigel 5 Control command 230 V for single-and twin-engine operatorMaterial number: D113693 00004 Shipping and handling costs:31,95 € Price: 334,00 € Net price:280,67 € Number: Back Article description - BFT Rigel 5 Control command 230 V for single-and twin-engine operator230 V - CONTROL RIGEL 5 Control system of the self-monitoring the operation of one or two motors, with a maximum output power. 600 W motor. Separately with integrated radio receiver and set the time for motor 1 and 2, and torque control braking force. Permanent self-diagnosis. Defined order of opening and closing and conducting a functional pedestrian. Connection for electric lock EBP, opening the door ECB 230 V indicator light, light connection (230V / 150W), status display door, pairs of photocells, emergency stop button, signaling system alarm antenna safety switch, timer and pulse floating Control system self-monitoring according to EN 12453 and EN 12445 Specifications and technical data: Voltage: 230 V + / -10% 50 Hz max. Power: 600 W + 600 W Room / night lighting: max. 150 W Accessory Power: 24 Vac / max. 1 A Door lock: 12 V DC / max. 0.5 A (2 A for 3 seconds) Light output: 230 V / max. 150 W Indicator: 230 V / max. 40 W Display the status of the door: 24 V / max. W 3 Logical activated: -TCA-closing function -Sequence of pulses in the 2 -, 3 - or 4-step logic Pulse-blocking "open door" for the movement -Movement "Close the door" blocking pulse Pulse-blocking while leaving open the period of TCA -An alarm light flashing pre-attached (3 sec) - Man dead-or pulse operation -Ambient-or pilot (terminal 12-13) -Quick-closing after the release of the function of a photoelectric cell occupied -Stabilization of oil pressure (Compensates for reducing the volume of oil due to temperature differences) -Back-pressure control (for about 2 seconds of opening pressure closure to facilitate the release of the electric lock EBP by wind resistance) (For use with hinged door stops floor) -Calculation of time-walk -Stair-lighting or an alarm output (terminals 16 to 17) -Entering the electric lock -Timers pedestrian or two engines -Sensor is an "open door" in motion activated -Operation with a single-or double leaf -Contact strips-or light barriers at the opening (terminal 36 - 37) -Control of back pressure (closed for about 2 sec. Pressure in the opening to facilitate the release of the electric lock by EBP wind resistance) (For use with hinged door stops floor) -Next-pulse obtained by accepting or training (Master / Slave) - For 2 - Display the status of the door and the radio channel can be operated -Code fixed or rolling mode-mode (only for use with UNIRADIO) -Self-learning remote controls away -Surveillence photocells connected (opening and Closing separated) -Follow-safety strips connected Adjustable parameters: -Running / working time operators (separately for motor 1 and motor 2) (3-180 seconds) -Time-operation pedestrians (3-90 sec) -Automatic closure time (3-120 s) -Delay in opening vanteils (1-10 seconds) -Delay-leaf for closure (1 - 20 sec) -Torque (0-99%) -Couple in the deceleration phase (0 - 99%) -Slow-closing period (0-10 seconds) -Garde-time traffic light control (0 - 30 sec) -Power-Brake (0-99%) -Engine preheat (0-99%) (for use only with hydraulic operators for swing gates) (usable only with optional module on board SSR5) -Force brake emergency brake (emergency stop, safety strips) (0 - 99%) -Area-address for serial ports (0 - 127) Recommend this product. |
 | BFT Steuerung Rigel 6 für ein oder zwei 230 V-Antriebe - ersetzt Rigel 5Material number: D113833 00002 Price: 486,58 € PL: S05-P13a / KS01-oben Add to shopping basketDetails |