Comfort 515L pre-cabled motor unit
with a separate control unit Control x.51; with multi bit 868 MHz remote control; 1 pc. Digital 304 4-channel mini manual transmitter,  with fittings, gate and post brackets (zinc plated and blue chromated)

Application:
with a leaf width* of 3.500 mm max.
with a leaf height of  2.500 mm max.,
with 50% max. covered leaf surface
with a max. leaf weight of 200 kg,
with up to 2% ascent,
e-measurement from -30 to 320 mm 

Function:
- Economy mode
- Electronic operation of final positions by means of Hall sensor technology
- Smooth start/smooth stop
- Excess travel stop
- Release
- Connection of push button, remote digital coder, and key-operated push button
- Connection of 'Open' and 'Close' photocell
- Connection of 24 V DC signal light
- Connection of 24 V DC electrical lock
- Connection of device 8.2 kOhm 'Open' and 'Close' closing edge safety device
- Built-in 8.2 kOhm analysis
- back-up-compatibility in connection with back-up 400/700
- connection of battery back-up
- Automatic 'Open' and 'Close' shutoff separately programmable
- Gate travel speed programmable
- Active leaf function programmable (only applies to 2 leaf facilities)
- Automatic closing function
- programmable relay output
- signal light, gate position OPEN/SHUT, wiping pulse – 1 second, malfunction, illumination
- Error message
- Reset function

Specifications:
Pressure and traction: 1.000 N max.
Height of lift: 600 mm
Operating voltage: 230 V
Nominal frequency: 50/60 Hz
Control voltage: 24 V
Colour: anthracite grey
Motor unit dimensions: 122 x 198 x 755 mm
Control dimensions: 120 x 240 x 100 mm 

In order to stabilize the leaves in a shut position we recommend a mechanical stop at the “CLOSED” position.

*The max. gate leaf width mentioned is a non-committal recommendation for smooth-running gates. If higher wind surcharges are expected (e. g. with full surface gate designs) the wind and the drive moments require checking.