Hormann RotaMatic PL2 hinged gate operator with a heating

Sturdy electro-mechanical hinged door operator
for 2-leaf hinged gates, up to a max. gate height of
2,000 mm, leaf width from of max. 2,500 mm, leaf weight of 400 kg max., e-dimensions: e=-30 to +150 mm. For a door width over 1,500 mm an electronic lock is recommended. 
Not usable for commercial premises!

Specifications:
24 V direct current gear motor with worm gear,
motor protection type IP 44, mains supply 230 - 240 V AC, 50 Hz, control voltage 24 V DC, operating mode S2
- 4 minutes, tractive force and pressure 2,500 N, short-term peak-power 2,700 N
 
Control electronics:
In a separate housing IP 65, microprocessor
control, programming via DIL-switches,
adjustable force catch, smooth start and stop, automatic closing integrated. Three safety devices are connectable. With 2-leaf hinged doors one leaf can be used as active leaf.

Standard equipment:
2 pcs gear motor
1 pc control electronics
1 pc 4-button mand transmitter HS 4 BS (black)
unidirectional HE 3 BiSecur receiver at 868.3 MHz for pulse and partial opening functions (no status signal available)

Housing:
Aluminium / zinc die-cast / weatherproof
glass fibre reinforced plastic

Temperature range:
From -35 °C/–31° F to 60 °C/140°F

Delivery scope:
1.5 m test run cable and galvannealed mounting material included, for doors with rising forming see additional accessories.

Equipped with a heating for application in extreme colds of down to -35 °C/–23.8° F. The drive profile is directly heated with a rod heating. The drive and the control heating are supplied through 230 V AC.

Note:
When planning hinged door facilities check max. leaf filling taking regional wind loads into account.
Activated automatic closing requires application of a light barrier!