 |
;) Expand picture | Hormann hand transmitter HSP-C 4-channel 868.3 MHz, black buttonsMaterial number:
437468 Shipping and handling costs:29,95 € Price: 72,45 € Net price:60,88 € Number: Back Article description - Hormann hand transmitter HSP-C 4-channel 868.3 MHz, black buttonsHörmann hand transmitter HSP-C 4-channel 868.3 MHz.
Pulse, with electronic control lock 868 MHz, in a black-coloured case, key ring and battery included (does not suit BiSecur receivers!) Battery: Lithium coin cell 3 V / Type: CR2025 Dimensions (diameter, height) d 48 x h 13 mm ATTENTION!!! This 868 MHz hand transmitter is supposed to replace controls with black buttons. Only order it if your Hörmann hand transmitter has a blue or black buttons too!!!
To control older Hörmann door-drives with 27 MHZ or 40 MHz (different button colour) or third-party brands you need at least one Hörmann receiver with 868.3 MHz.
Coding of a hand transmitter with the help of an already operative hand transmitter. ATTENTION: Coding process opens the gate. In order to control the door and in order to prevent unexpected consequences we recommend that you remain in the garage while coding. 1. Take your already operative hand transmitter and press one button. 2. Now take the new hand transmitter and act as follows: - for hand transmitters with blue buttons: hold side by side - for hand transmitters with green or grey buttons: hold opposed to each other 3. Press the same button on your new hand transmitter and keep it pressed. For 4 seconds the LED flashes with low frequency, then with higher frequency thus showing successful coding. Release all buttons. 4. Repeat this process with every button on your hand transmitter. 5. Test your new hand transmitter. Coding with the help of a radio receiver For hand transmitters with blue or grey buttons ATTENTION: this action deletes all hand transmitters which have been stored in the receiver before. Look for the radio receiver of your drive. (small grey box, circa 1/3 of the size of a cigarette packet). Press the button of your radio receiver. The LED of the receiver illuminates and blinks slowly. Please depart in 3m distance of the receiver. Take your new hand transmitter and press one button. The LED of the receiver flashes with higher frequency while still pressing the button. Release the button of your hand transmitter. The control lamp continues flashing for some seconds and finally goes out. Test your new hand transmitter. Recommend this product. |