The ACM20 control unit is a modern 230 V AC motor control unit with microcontroller. In the full version, two motors with current-controlled power cut-off can be operated. The control unit can be used for swing gates and sliding gates as well as for rolling gates, barriers, etc.
Function
15 programmable menus
Force cut-off via current measurement ACM20-02 and ACM20-03
Operation without limit switch possible
Active leaf input for motor 2
Light barrier input
Red/green traffic light as status indicator, plug-in card DSK20-51 required
Traffic light control for one-way streets, plug-in card DSK20-50 required
Safety edge evaluation 1K2+8K2, plug-in card DSK02-50 required
Fraba OSE evaluation, plug-in card OSE12-50 required.
Technical data:
Operating voltage: 230 V ±10 % 50 Hz
Outputs:
max. two 230 V/AC motors,
E-lock 12 or 24 V/AC,
light and warning light each 230 V/AC max. 500 W,
AC output 24 V/AC max. 200 mA and 230 V/AC max. 1 A
Inputs:
Impulse button (open, stop, close, stop, open...),
Open push-button,
close push-button,
Stop push-button,
light barrier,
limit switch,
Active leaf Slots:
Radio plug-in card 1- or 4-channel,
traffic light or one-way street plug-in card (DSK20-51/20-50),
SE evaluation (DSK02-50) for evaluation of electrical safety contact edges 1K2+8K2 Motor power: max. 500 W per motor Connection:
Screw terminals, max 4 qmm
Operating temperature: -20° C to +50° C at 30 % to 80 % rel. humidity
Dimensions:
255 mm x 176 mm x 80 mm Plastic housing,
IP54 Weight: approx. 1.6 kg incl. packaging