Expand picture | Hörmann hand transmitter HSM 4-channel 26.995 MHz for AustriaMaterial number: 437231 Shipping and handling costs:29,95 € Price: 73,00 € Net price:61,34 € Number: PL: S06-P83eAdd to shopping basketBack Article description - Hörmann hand transmitter HSM 4-channel 26.995 MHz for AustriaHörmann remote control HSM 4-Kanal 26,995 MHz. Particularly for Austria, UK, Denmark, Belgium
Dimensions 37 x 60 x 12 mm.
This remote control comes with a battery and instructions.
A key ring (art.-no. 438010) as accessory item is available.Attention! Cheque the frequency on the quartz!
The remote control is also available with 27,015 or 26,975 MHz. Coding of a remote control with the help of an already operative remote control ATTENTION: Coding process opens the door. In order to control the door and in order to prevent unexpected consequences we recommend to remain in the garage while coding. 1. Take your already operative remote control and press one button. 2. Now take the new remote control and act as follows: - for remote controls with blue buttons: hold side by side - for remote controls with green or grey buttons: hold opposed to each other 3. Press the same button on your new remote control and keep it pressed. For 4 seconds the LED flashes with low frequency, then with higher frequency thus showing successful coding. Release all buttons. 4. Repeat this process with every button on your remote control. 5. Test your new remote control. Coding a remote control with green buttons with the help of an old and faulty Hörmann DH remote control
1. Open the battery case of your old Hörmann DH remote control. Pay attention to the 10 mini switches' positions: ON or OFF. 2. Open the battery case of the new remote control with the green buttons. With a pointed item press the small button on the left side above the battery (see 2 red circles in 'other images'). The control lamp of the remote control lights up. (Coding should follow a few seconds after pressing the small button. Start again if control lamp stops flashing before end of coding.) Code your remote control by pressing 10 times: - the upper button of your remote control which corresponds to the mini switches' ON position - the lower button which corresponds to the OFF position. After 10 times pressing the control lamp will flash in short intervals for a short moment. Test your new remote control. Coding with the help of a radio receiver For remote controls with blue or grey buttons (connection of the green receiver = -(20), brown = (5), white = cte (21))
ATTENTION: this action deletes all remote controls which have been stored in the receiver before.Find the radio receiver of your drive. (small grey box, approx. 1/3 the size of a cigarette packet). Press the button of your radio receiver. The LED of the receiver lights up and blinks slowly. Get in a 3m distance from the receiver. Take your new remote control and press one of the buttons. The LED of the receiver flashes with higher frequency while you keep the button pressed. Release the button on your remote control. The control lamp continues flashing for some seconds and finally goes out. Test your new remote control. Recommend this product. |
Key ring for Hörmann hand transmitter HSM and HSEMaterial number: 438010 Price: 6,19 € Key ring for Hörmann HSM4 and HSE2 hand transmittersPL: BS01-P001 Add to shopping basketDetails | |
Battery 12 V Type 23 A. for remote controlsMaterial number: Bat-12 Price: 3,50 € Replacement battery 12 V Type 23A, for remote controls | |
Wall holder for Hörmann remote controls HS, HSM, HSSMaterial number: 437551 Price: 5,83 € Wall bracket for Hörmann HS 1, HS 4, HSM 4, HSS 4PL: S05-P50a Add to shopping basketDetails | |
Hörmann Support for Remote control with sunshade clip for HS, HSM, HSSMaterial number: 438024 Price: 8,69 € Hand transmitter wall Support with sunshade clip for HS 1, HS 4, HSM 4 und HSS 4PL: S06-P83d Add to shopping basketDetails |